國立成功大學LOGO

Hsing-I Hsiang

Professor and Chairman

Hsing-I Hsiang

Professor

Experience

1995-2000

RD Director and Assistant Vice President

Mag. Layers Co. Ltd.

1995-2000

2000-2001

Assistant Professor, Department of Materials Science and Engineering

I-SHOU University

2000-2001

2001-2004

Assistant professor, Department of Resources Engineering

National Cheng Kung University

2001-2004

2004-2008

Associate Professor, Department of Resources Engineering

National Cheng Kung University

2004-2008

2008-Present

Professor, Department of Resources Engineering

National Cheng Kung University

2008-Present
Professor

Research Field

Raw materials and process development of the ceramic materials for light (solar thin-film cells, transparent polycrystalline sapphire), electricity (electronic ceramics, currently mostly focused on low-temperature co-fired ceramics), and magnetism (materials and components of ceramic and alloy magnetic materials).

1
Electroceramics
2
Ceramic Processing
3
Thick Film Technology
4
Powder Technology

Teaching Subject

1
Mineralogy
2
Ceramic Processing
3
Ceramic Engineering and Laboratory
Hsing-I Hsiang

Projects and Publications

Past five years

Projects

英文版填這裡

Publications

Journal Papers

1. Wu, Yung-Ping, and Hsing-I. Hsiang. “Sintering temperature and atmosphere effects on electric and magnetic properties of multilayer FeSiCr alloy inductors.” Materials Science and Engineering: B 275 (2022): 115523.
2. Wu, Yu-Chuan, et al. “Low dielectric loss ceramics in the Mg4Nb2O9-ZnAl2O4-TiO2 ternary system.” Journal of the European Ceramic Society 42.2 (2022): 448-452.
3. Wu, Yung-Ping, and Hsing-I. Hsiang. “Sintering temperature and atmosphere effects on electric and magnetic properties of multilayer FeSiCr alloy inductors.” Materials Science and Engineering: B 275 (2022): 115523.
4. Hsiang, Hsing-I., Shau-Guang Fan, and Wen-Hsi Lee. “Fabrication, simulation, and characterization of planar inductors.” Materials Today Communications 29 (2021): 102929.
5. Hsiang, Hsing-I., Chih-Cheng Chen, and Han-Yang Su. “Effect of SiO2 nanoparticle addition on growth of interfacial Ag3Sn intermetallic compound layers between lead-free solder and silver conductor.” SN Applied Sciences 3.12 (2021): 1-12.
6. Shen, Yu-Min, and Hsing-I. Hsiang. “Effects of the sodium ions addition on the varistor properties of ZnO–Co3O4–Pr6O11 ceramics.” Journal of Materials Science: Materials in Electronics 32.24 (2021): 28935-28941.
7. Hsiang, Hsing-I., et al. “Polycrystalline alumina ceramic fabrication using digital stereolithographic light process.” Ceramics International 47.23 (2021): 33815-33826.
8. Hsiang, Hsing-I., Cheng-Hsuan She, and Sheng-Heng Chung. “Materials and electrode designs of high-performance NiCo2S4/Reduced graphene oxide for supercapacitors.” Ceramics International 47.18 (2021): 25942-25950.
9. Jhan, J. S., Chen, C. C., Liu, Y. C., & Hsiang, H. I. (2021). Yttria-Stabilized Tetragonal Zirconia with Superior Mechanical Properties Prepared Using Gel Casting Technology and a Two-Stage Sintering Process.
10. Lee, K. Y., Chen, C. C., Hsiang, H. I., Wang, J., Tang, D., Yen, F. S., & Huang, C. Y. (2021). Effects of glycerol addition on the slurry dispersion and mechanical properties of alumina ceramics prepared by gel-casting process. Ceramics International, 47(14), 20260-20267.
11. Hsiang, Hsing-I., Chi-He Chen, and Chih-Cheng Chen. “Magnetic properties of FeSiCr alloy powder coils made by gel casting process.” Journal of Materials Science: Materials in Electronics 32.11 (2021): 14584-14591.
12. Wang, Ying, et al. “Exploring the evolution of pores in HIPed Y2O3 transparent ceramics.” Ceramics International 47.8 (2021): 11637-11643.
13. Hsiang, Hsing-I., Kai-Hsin Chuang, and Wen-Hsi Lee. “Magnetic Properties of Iron-Based Alloy Powder Coils Prepared with Screen Printing Using High-Solid-Content Magnetic Pastes.” Journal of Electronic Materials 50.4 (2021): 2331-2338.
14. Hsiang, Hsing-I., Kai-H. Chuang, and Wen-H. Lee. “FeSiCr alloy powder to carbonyl iron powder mixing ratio effects on the magnetic properties of the iron-based alloy powder cores prepared using screen printing.” Materials 14.4 (2021): 1034.
15. Hsiang, Hsing-I., Kai-Hsin Chuang, and Wen-Hsi Lee. “Titanate coupling agent surface modification effect on the magnetic properties of iron-based alloy powder coil prepared using screen printing.” Journal of Materials Science: Materials in Electronics 32.2 (2021): 1800-1807.
16. Hsing-I Hsiang, Ssu-Kai Wang, Chih-Cheng Chen. 2020.11. “Electromagnetic properties of FeSiCr alloy powders modified with amorphous SiO2.” Journal of Magnetism and Magnetic Materials. 514. 167151
17. Hsing‐I Hsiang, Sheng‐Mao Yang, Chih‐Cheng Chen. 2020.04. “Effects of CuO content in the glass on the interfacial reaction for the NiCuZn ferrites‐FeSiCr alloy composites.” International Journal of Applied Glass Science. 11. 774-783
18. Hsing-I Hsiang. 2020.08. “Progress in materials and processes of multilayer power inductors.” Journal of Materials Science: Materials in Electronics. 31. 1-22
19. Hsing-I Hsiang, Chih-Cheng Chen, Liang-Fang Fan, Hao-Yin Cheng. 2020.05. “Rheological behaviors of silver conductive pastes with ethyl cellulose.” Circuit World.
20. JS Jean, HW Lin, ZH Li, HJ Yang, HI Hsiang, KM Yang, CL Wang, YH Shen, CC Kuo, WC Kuo. 2019.03. “Salinity-enhanced Release of Trace Metals from Sandstone and Variations in Mineral Compositions after Water-rock Interactions in the Presence of Supercritical CO2.” Aerosol and Air Quality Research 19. 639-648.
21. YC Wu, CT Yang, M Sun, HI Hsiang. 2019.04. “Gas‐pressure assisted sintering of copper indium gallium selenide thin films.” Journal of the American Ceramic Society 102(4). 1548-1552.
22. YP Wu, HY Chiang, HI Hsiang. 2019.01. “AgCrO2 formation mechanism during silver inner electrode and Fe–Si–Cr alloy powder co-firing in metal multilayer chip power inductors.” Journal of Materials Science: Materials in Electronics 30. 8080-8088.
23. KY Lee, CC Chen, HI Hsiang, FS Yen, CY Huang. 2019.07. “Fully sintered alumina with a higher Vickers hardness prepared using a gel‐casting process.” International Journal of Applied Ceramic Technology 16(4). 1493-1500.
24. HI Hsiang, CC Chen, SY Yang. 2019.01. “Microwave dielectric properties of Ca0.7Nd0.2TiO3 ceramic-filled CaO-B2O3-SiO2 glass for LTCC applications.” Journal of Advanced Ceramics 8(3). 345-351.
25. HI Hsiang, CC Chen, SY Yang. 2019.01. “Structure, crystallization, and dielectric properties of the Al2O3 filled CaO–B2O3–SiO2–Al2O3 glass composites for LTCC applications.” Japanese Journal of Applied Physics 58. 091010.
26. HI Hsiang, LF Fan, JJ Hung. 2019.11. “Effects of the sodium stearate addition on the corrosion resistance and electromagnetic properties of phosphatized iron-based SMCs.” Journal of Magnetism and Magnetic Materials 490. 165532.
27. HY Lai, HI Hsiang. 2019.05. “Dense CIGS films obtained by blending submicron‐sized particles with nanoparticle suspensions using a non‐vacuum process.” International Journal of Applied Ceramic Technology 16(3). 974-980.
28. JS Jean, HW Lin, ZH Li, HJ Yang, HI Hsiang, KM Yang, CL Wang, YH Shen, CC Kuo, WC Kuo. 2019.03. “Salinity-enhanced Release of Trace Metals from Sandstone and Variations in Mineral Compositions after Water-rock Interactions in the Presence of Supercritical CO2.” Aerosol and Air Quality Research 19. 639-648.
29. YC Wu, CT Yang, M Sun, HI Hsiang. 2019.04. “Gas‐pressure assisted sintering of copper indium gallium selenide thin films.” Journal of the American Ceramic Society 102(4). 1548-1552.
30. YP Wu, HY Chiang, HI Hsiang. 2019.01. “AgCrO2 formation mechanism during silver inner electrode and Fe–Si–Cr alloy powder co-firing in metal multilayer chip power inductors.” Journal of Materials Science: Materials in Electronics 30. 8080-8088.
31. KY Lee, CC Chen, HI Hsiang, FS Yen, CY Huang. 2019.07. “Fully sintered alumina with a higher Vickers hardness prepared using a gel‐casting process.” International Journal of Applied Ceramic Technology 16(4). 1493-1500.
32. HI Hsiang, CC Chen, SY Yang. 2019.01. “Microwave dielectric properties of Ca0.7Nd0.2TiO3 ceramic-filled CaO-B2O3-SiO2 glass for LTCC applications.” Journal of Advanced Ceramics 8(3). 345-351.
33. HI Hsiang, CC Chen, SY Yang. 2019.01. “Structure, crystallization, and dielectric properties of the Al2O3 filled CaO–B2O3–SiO2–Al2O3 glass composites for LTCC applications.” Japanese Journal of Applied Physics 58. 091010.
34. HI Hsiang, LF Fan, JJ Hung. 2019.11. “Effects of the sodium stearate addition on the corrosion resistance and electromagnetic properties of phosphatized iron-based SMCs.” Journal of Magnetism and Magnetic Materials 490. 165532.
35. HY Lai, HI Hsiang. 2019.05. “Dense CIGS films obtained by blending submicron‐sized particles with nanoparticle suspensions using a non‐vacuum process.” International Journal of Applied Ceramic Technology 16(3). 974-980.
36. CC Chuang, HI Hsiang, JS Hwang, TS Wang. 2019.02. “Synthesis and characterization of Al2O3-Ce0. 5Zr0. 5O2 powders prepared by chemical coprecipitation method.” Journal of Alloys and Compounds 470(1-2). 387-392.
37. HI Hsiang, CS Hsi, CC Huang, SL Fu . 2019.02. “Low temperature sintering and dielectric properties of BaTiO3 with glass addition.” Materials Chemistry and Physics 113(2-3). 658-663.
38. HI Hsiang, LF Fan, KT Ho. 2018.05. “Relationship Between the Microstructure and Magnetic Properties of Fe–Si–Cr Powder Cores” IEEE Transactions on Magnetics VOL. 54. NO. 5.
39. YP Wu, HY Chiang, HI Hsiang. 2018.08. “Interactions between silver inner electrode and Fe-Si-Cr alloy of metal multilayer chip inductors.” AIP Advances 8. 085006.
40. MT Sun, CT Yang, YC Wu, HI Hsiang. 2018.11. “Effects of selenization process on densification and microstructure of Cu (In, Ga) Se2 thin film prepared by doctor blading of CIGS nanoparticles.” Ceramics International 44(16). 20508-20513.
41. LF Fan, HI Hsiang, JJ Hung. 2018.03. “Silane surface modification effects on the electromagnetic properties of phosphatized iron-based SMCs.” Applied Surface Science 433. 133-138.
42. CT Yang, HI Hsiang. 2018.01. “Rapid synthesis and characterization of nearly dispersed marcasite CuSe2 and berzelianite Cu2Se crystallites using the chemical reduction process.” Materials Research Bulletin 97. 30-36.
43. HI Hsiang, LF Fan, JJ Hung. 2018.02. “Phosphoric acid addition effect on the microstructure and magnetic properties of iron-based soft magnetic composites.” Journal of Magnetism and Magnetic Materials 447. 1-8.
44. Chang-Ting Yang, Hsing-I Hsiang. 2017.12. “Different ligand exchange solvents effect on the densification of CuIn0.7Ga0.3Se2 prepared using the heating-up method.” Applied Surface Science 426. 1148-1157.
45. Hsing-I Hsiang, Liang-Fang Fan, Kuan-Ting Ho. 2017.12. “Minor yttrium addition effect on FeSiCr alloy powder core electromagnetic properties.” Journal of Magnetism and Magnetic Materials 444. 1-6.
46. Hsing-I Hsiang, Chih-Cheng Chen, Wen-Chin Kuo. 2017.11. “Micro-channel formation on NiCuZn ferrite green sheets prepared by hot embossing.” Ceramics International 43. 13853-13859.
47. Chun-Chih Kuo, Chein-Lee Wang, Hsing-I Hsiang. 2017.06. “Mechanical and microscopic properties of API G cement after exposure to supercritical CO2.” Terrestrial Atmospheric and Oceanic Science 28. 209-216.
48. Bieng-Zih Hsieh, Chien-Hao Shen, Hsing-I Hsiang. 2017.06. “Case study on safety index for CO2 sequestration in a deep saline aquifer.” Terrestrial Atmospheric and Oceanic Science 28(3). 229-238.
49. Chang-Ting Yang, Hsing-I Hsiang, Tzu-Sheng Huang, Pei-Chen Huang, Yu-Kai Han. 2017.05. “Thermal conductivity and dielectric properties of PEDOT:PSS-AlN filler reinforced water-soluble polymer composites.” Ceramics International 43. s710-s716.
50. Hsing-I Hsiang, Wen-Ching Kuo, Chi-Shiung His. 2017.05. “Sintering and cooling atmosphere effects on the microstructure, magnetic properties and DC superposition behavior of NiCuZn ferrites.” Journal of the European Ceramic Society 37(5). 2123-2128.