教授
過往經歷
教授
研究領域
光(太陽能薄膜電池、透明多晶藍寶石)、電(電子陶瓷，目前多集中在低溫共燒陶瓷)、磁(陶瓷及合金磁性材料之材料及元件)之相關陶瓷材料之原料及製程開發。
任教科目
近五年
研究計畫
1. Y203：MgO奈米複合光學陶瓷材料研製(2021)
2. 巨介電、低介電損失之SrTiO3基介電陶瓷材料開發(2021)
3. 可應用於DLP-3D 列印用氧化鋯漿料及製程開發(2021)
4. 前瞻被動元件技術研發中心1/3(2020)
5. 3D列印用氧化鋁漿料之組成開發(2020)
6. 銀膠與低溫共燒陶瓷共燒檢測分析(2020)
7. 積層式固態鋰離子電池之材料及製程研究(2020)
8. 黏結劑噴塗成型製作砂模之無機黏結劑材料開發(2020)
9. 應用於高功率固體雷射發射器之複合材料結構Yb:Y2O3雷射陶瓷之製作技術(2020)
10. 可應用於銅電極共燒的 NP0電容之(Ca,Sr)(Ti,Zr)O3之介電性質以及再氧化技術研究(2020)
11. 可應用於銅電極共燒NPO電容之(Ca,Sr)(Ti,Zr)O3之介電性質以及再氧化技術研究(2019)
12. 以水系膠鑄成型技術製作高韌性氧化鋯陶瓷之研究(2019)
13. 介質共振器材料(2019)
14. 軟性平面電感器之製作(2018)
15. 積層式變組器材料之開發(2018)
16. 以膠鑄成形法製作手機陶瓷背板(2018)
17. 效果等同日系產品之可焊性銀膏材料之開發(2018)
18. 可應用於功率電感器之鐵基磁性粉末表面改質技術(2018)
19. 可應用於次世代固態白光照明之透明氧化鋁多晶陶瓷之製作技術(2018)
20. 新世代電源用積層式鐵氧磁體-鐵矽鉻合金複合電感元件之材料及製程研究(2017)
學術著作
期刊論文
1. Wu, Yung-Ping, and Hsing-I. Hsiang. “Sintering temperature and atmosphere effects on electric and magnetic properties of multilayer FeSiCr alloy inductors.” Materials Science and Engineering: B 275 (2022): 115523.
2. Wu, Yu-Chuan, et al. “Low dielectric loss ceramics in the Mg4Nb2O9-ZnAl2O4-TiO2 ternary system.” Journal of the European Ceramic Society 42.2 (2022): 448-452.
3. Wu, Yung-Ping, and Hsing-I. Hsiang. “Sintering temperature and atmosphere effects on electric and magnetic properties of multilayer FeSiCr alloy inductors.” Materials Science and Engineering: B 275 (2022): 115523.
4. Hsiang, Hsing-I., Shau-Guang Fan, and Wen-Hsi Lee. “Fabrication, simulation, and characterization of planar inductors.” Materials Today Communications 29 (2021): 102929.
5. Hsiang, Hsing-I., Chih-Cheng Chen, and Han-Yang Su. “Effect of SiO2 nanoparticle addition on growth of interfacial Ag3Sn intermetallic compound layers between lead-free solder and silver conductor.” SN Applied Sciences 3.12 (2021): 1-12.
6. Shen, Yu-Min, and Hsing-I. Hsiang. “Effects of the sodium ions addition on the varistor properties of ZnO–Co3O4–Pr6O11 ceramics.” Journal of Materials Science: Materials in Electronics 32.24 (2021): 28935-28941.
7. Hsiang, Hsing-I., et al. “Polycrystalline alumina ceramic fabrication using digital stereolithographic light process.” Ceramics International 47.23 (2021): 33815-33826.
8. Hsiang, Hsing-I., Cheng-Hsuan She, and Sheng-Heng Chung. “Materials and electrode designs of high-performance NiCo2S4/Reduced graphene oxide for supercapacitors.” Ceramics International 47.18 (2021): 25942-25950.
9. Jhan, J. S., Chen, C. C., Liu, Y. C., & Hsiang, H. I. (2021). Yttria-Stabilized Tetragonal Zirconia with Superior Mechanical Properties Prepared Using Gel Casting Technology and a Two-Stage Sintering Process.
10. Lee, K. Y., Chen, C. C., Hsiang, H. I., Wang, J., Tang, D., Yen, F. S., & Huang, C. Y. (2021). Effects of glycerol addition on the slurry dispersion and mechanical properties of alumina ceramics prepared by gel-casting process. Ceramics International, 47(14), 20260-20267.
11. Hsiang, Hsing-I., Chi-He Chen, and Chih-Cheng Chen. “Magnetic properties of FeSiCr alloy powder coils made by gel casting process.” Journal of Materials Science: Materials in Electronics 32.11 (2021): 14584-14591.
12. Wang, Ying, et al. “Exploring the evolution of pores in HIPed Y2O3 transparent ceramics.” Ceramics International 47.8 (2021): 11637-11643.
13. Hsiang, Hsing-I., Kai-Hsin Chuang, and Wen-Hsi Lee. “Magnetic Properties of Iron-Based Alloy Powder Coils Prepared with Screen Printing Using High-Solid-Content Magnetic Pastes.” Journal of Electronic Materials 50.4 (2021): 2331-2338.
14. Hsiang, Hsing-I., Kai-H. Chuang, and Wen-H. Lee. “FeSiCr alloy powder to carbonyl iron powder mixing ratio effects on the magnetic properties of the iron-based alloy powder cores prepared using screen printing.” Materials 14.4 (2021): 1034.
15. Hsiang, Hsing-I., Kai-Hsin Chuang, and Wen-Hsi Lee. “Titanate coupling agent surface modification effect on the magnetic properties of iron-based alloy powder coil prepared using screen printing.” Journal of Materials Science: Materials in Electronics 32.2 (2021): 1800-1807.
16. Hsing-I Hsiang, Ssu-Kai Wang, Chih-Cheng Chen. 2020.11. “Electromagnetic properties of FeSiCr alloy powders modified with amorphous SiO2.” Journal of Magnetism and Magnetic Materials. 514. 167151
17. Hsing‐I Hsiang, Sheng‐Mao Yang, Chih‐Cheng Chen. 2020.04. “Effects of CuO content in the glass on the interfacial reaction for the NiCuZn ferrites‐FeSiCr alloy composites.” International Journal of Applied Glass Science. 11. 774-783
18. Hsing-I Hsiang. 2020.08. “Progress in materials and processes of multilayer power inductors.” Journal of Materials Science: Materials in Electronics. 31. 1-22
19. Hsing-I Hsiang, Chih-Cheng Chen, Liang-Fang Fan, Hao-Yin Cheng. 2020.05. “Rheological behaviors of silver conductive pastes with ethyl cellulose.” Circuit World.
20. JS Jean, HW Lin, ZH Li, HJ Yang, HI Hsiang, KM Yang, CL Wang, YH Shen, CC Kuo, WC Kuo. 2019.03. “Salinity-enhanced Release of Trace Metals from Sandstone and Variations in Mineral Compositions after Water-rock Interactions in the Presence of Supercritical CO2.” Aerosol and Air Quality Research 19. 639-648.
21. YC Wu, CT Yang, M Sun, HI Hsiang. 2019.04. “Gas‐pressure assisted sintering of copper indium gallium selenide thin films.” Journal of the American Ceramic Society 102(4). 1548-1552.
22. YP Wu, HY Chiang, HI Hsiang. 2019.01. “AgCrO2 formation mechanism during silver inner electrode and Fe–Si–Cr alloy powder co-firing in metal multilayer chip power inductors.” Journal of Materials Science: Materials in Electronics 30. 8080-8088.
23. KY Lee, CC Chen, HI Hsiang, FS Yen, CY Huang. 2019.07. “Fully sintered alumina with a higher Vickers hardness prepared using a gel‐casting process.” International Journal of Applied Ceramic Technology 16(4). 1493-1500.
24. HI Hsiang, CC Chen, SY Yang. 2019.01. “Microwave dielectric properties of Ca0.7Nd0.2TiO3 ceramic-filled CaO-B2O3-SiO2 glass for LTCC applications.” Journal of Advanced Ceramics 8(3). 345-351.
25. HI Hsiang, CC Chen, SY Yang. 2019.01. “Structure, crystallization, and dielectric properties of the Al2O3 filled CaO–B2O3–SiO2–Al2O3 glass composites for LTCC applications.” Japanese Journal of Applied Physics 58. 091010.
26. HI Hsiang, LF Fan, JJ Hung. 2019.11. “Effects of the sodium stearate addition on the corrosion resistance and electromagnetic properties of phosphatized iron-based SMCs.” Journal of Magnetism and Magnetic Materials 490. 165532.
27. HY Lai, HI Hsiang. 2019.05. “Dense CIGS films obtained by blending submicron‐sized particles with nanoparticle suspensions using a non‐vacuum process.” International Journal of Applied Ceramic Technology 16(3). 974-980.
28. JS Jean, HW Lin, ZH Li, HJ Yang, HI Hsiang, KM Yang, CL Wang, YH Shen, CC Kuo, WC Kuo. 2019.03. “Salinity-enhanced Release of Trace Metals from Sandstone and Variations in Mineral Compositions after Water-rock Interactions in the Presence of Supercritical CO2.” Aerosol and Air Quality Research 19. 639-648.
29. YC Wu, CT Yang, M Sun, HI Hsiang. 2019.04. “Gas‐pressure assisted sintering of copper indium gallium selenide thin films.” Journal of the American Ceramic Society 102(4). 1548-1552.
30. YP Wu, HY Chiang, HI Hsiang. 2019.01. “AgCrO2 formation mechanism during silver inner electrode and Fe–Si–Cr alloy powder co-firing in metal multilayer chip power inductors.” Journal of Materials Science: Materials in Electronics 30. 8080-8088.
31. KY Lee, CC Chen, HI Hsiang, FS Yen, CY Huang. 2019.07. “Fully sintered alumina with a higher Vickers hardness prepared using a gel‐casting process.” International Journal of Applied Ceramic Technology 16(4). 1493-1500.
32. HI Hsiang, CC Chen, SY Yang. 2019.01. “Microwave dielectric properties of Ca0.7Nd0.2TiO3 ceramic-filled CaO-B2O3-SiO2 glass for LTCC applications.” Journal of Advanced Ceramics 8(3). 345-351.
33. HI Hsiang, CC Chen, SY Yang. 2019.01. “Structure, crystallization, and dielectric properties of the Al2O3 filled CaO–B2O3–SiO2–Al2O3 glass composites for LTCC applications.” Japanese Journal of Applied Physics 58. 091010.
34. HI Hsiang, LF Fan, JJ Hung. 2019.11. “Effects of the sodium stearate addition on the corrosion resistance and electromagnetic properties of phosphatized iron-based SMCs.” Journal of Magnetism and Magnetic Materials 490. 165532.
35. HY Lai, HI Hsiang. 2019.05. “Dense CIGS films obtained by blending submicron‐sized particles with nanoparticle suspensions using a non‐vacuum process.” International Journal of Applied Ceramic Technology 16(3). 974-980.
36. CC Chuang, HI Hsiang, JS Hwang, TS Wang. 2019.02. “Synthesis and characterization of Al2O3-Ce0. 5Zr0. 5O2 powders prepared by chemical coprecipitation method.” Journal of Alloys and Compounds 470(1-2). 387-392.
37. HI Hsiang, CS Hsi, CC Huang, SL Fu . 2019.02. “Low temperature sintering and dielectric properties of BaTiO3 with glass addition.” Materials Chemistry and Physics 113(2-3). 658-663.
38. HI Hsiang, LF Fan, KT Ho. 2018.05. “Relationship Between the Microstructure and Magnetic Properties of Fe–Si–Cr Powder Cores” IEEE Transactions on Magnetics VOL. 54. NO. 5.
39. YP Wu, HY Chiang, HI Hsiang. 2018.08. “Interactions between silver inner electrode and Fe-Si-Cr alloy of metal multilayer chip inductors.” AIP Advances 8. 085006.
40. MT Sun, CT Yang, YC Wu, HI Hsiang. 2018.11. “Effects of selenization process on densification and microstructure of Cu (In, Ga) Se2 thin film prepared by doctor blading of CIGS nanoparticles.” Ceramics International 44(16). 20508-20513.
41. LF Fan, HI Hsiang, JJ Hung. 2018.03. “Silane surface modification effects on the electromagnetic properties of phosphatized iron-based SMCs.” Applied Surface Science 433. 133-138.
42. CT Yang, HI Hsiang. 2018.01. “Rapid synthesis and characterization of nearly dispersed marcasite CuSe2 and berzelianite Cu2Se crystallites using the chemical reduction process.” Materials Research Bulletin 97. 30-36.
43. HI Hsiang, LF Fan, JJ Hung. 2018.02. “Phosphoric acid addition effect on the microstructure and magnetic properties of iron-based soft magnetic composites.” Journal of Magnetism and Magnetic Materials 447. 1-8.
44. Chang-Ting Yang, Hsing-I Hsiang. 2017.12. “Different ligand exchange solvents effect on the densification of CuIn0.7Ga0.3Se2 prepared using the heating-up method.” Applied Surface Science 426. 1148-1157.
45. Hsing-I Hsiang, Liang-Fang Fan, Kuan-Ting Ho. 2017.12. “Minor yttrium addition effect on FeSiCr alloy powder core electromagnetic properties.” Journal of Magnetism and Magnetic Materials 444. 1-6.
46. Hsing-I Hsiang, Chih-Cheng Chen, Wen-Chin Kuo. 2017.11. “Micro-channel formation on NiCuZn ferrite green sheets prepared by hot embossing.” Ceramics International 43. 13853-13859.
47. Chun-Chih Kuo, Chein-Lee Wang, Hsing-I Hsiang. 2017.06. “Mechanical and microscopic properties of API G cement after exposure to supercritical CO2.” Terrestrial Atmospheric and Oceanic Science 28. 209-216.
48. Bieng-Zih Hsieh, Chien-Hao Shen, Hsing-I Hsiang. 2017.06. “Case study on safety index for CO2 sequestration in a deep saline aquifer.” Terrestrial Atmospheric and Oceanic Science 28(3). 229-238.
49. Chang-Ting Yang, Hsing-I Hsiang, Tzu-Sheng Huang, Pei-Chen Huang, Yu-Kai Han. 2017.05. “Thermal conductivity and dielectric properties of PEDOT:PSS-AlN filler reinforced water-soluble polymer composites.” Ceramics International 43. s710-s716.
50. Hsing-I Hsiang, Wen-Ching Kuo, Chi-Shiung His. 2017.05. “Sintering and cooling atmosphere effects on the microstructure, magnetic properties and DC superposition behavior of NiCuZn ferrites.” Journal of the European Ceramic Society 37(5). 2123-2128.
學術著作
二、專利
1. 用於製備藍寶石基材之漿料、其製備方法、及使用其製備藍寶石基材之方法，中華民國專利I637087。(2018)
2. Method of Synthesizing Copper Selenide Powder, US patent 9,656,867 B2.
3. 具有高直流疊加特性與高自然共振頻率之鐵氧磁體材料，中華民國專利I582801。 (2017)
4. 不同化學組成硒化銅粉體之合成方法，中華民國專利201630805。(2016)
5. 分離光電產業廢料之稀貴金屬回收方法，中華民國專利201620836。(2016)
6. 熱處理銅銦鎵硒殘餘靶材之回收方法，中華民國專利I496896。(2015)
7. 鋼爐渣的安定化方法，中華民國專利I482863。(2015)
8. 銅銦鎵硒殘餘靶材之回收方法，中華民國專利I458834 。(2014)
9. 鐵氧磁體複合材料及其製作方法，中華民國專利I447089。 (2014)
10. 磁性介電陶瓷複合材料，中華民國專利I378908。 (2012)
11. 低溫燒結助劑與使用此燒結助劑之微波介電陶瓷，中華民國專利I377187。(2012)
12. 含奈米填料之漆包線，中華民國專利I354301。 (2011)
13. 自潔性超疏水塗料，中華民國專利I327156 。(2010)
14. 船舶用防污減阻塗料，中華民國專利200902654。 (2009)
15. LC濾波器的製造方法，中華民國專利435003 。(2001)
16. 電感製程，中華民國專利425584。 (2001)
17. RC陣列製程，中華民國專利421879。 (2011)
18. 積層晶片元件標記的方法，中華民國專利371375。 (2000)
19. 積層晶片電感之製法，中華民國專利371375。 (1999)
20. 提昇磁珠耐電流量之方法及以該方法製成之磁珠，中華民國專利307062。 (1997)
